We were established as the most specialized mineral processing equipment company since 1985.
Our disc feeder can be configured with a speed-regulating motor according to user requirements. By adjusting the disc speed, the amount of ore feeding can be adjusted.
The primary function of the disc feeder is to supply materials to other equipment. The material can evenly enter a device so that the following process can work normally.
The disc feeder comprises a driving device, a feeder body, a belt conveyor for metering, and a metering device. It is a feeding device suitable for fine ore below 20mm. Therefore, it is widely used in various ores, coal powder, cement, clinker, limestone, clay, and other powdery, granular, or small lump materials.
1. Reasonable design and stable vibration
The structure design of the disc feeder is simple and reasonable, and the vibration is stable; the feeding is uniform, the continuous performance is good, and the exciting force is adjustable.
2. Good continuous performance and low probability of failure
The disc feeder can change and control the flow rate at any time, and is easy to operate; the eccentric block is the excitation source, with low noise, low power consumption, good adjustment performance, and no rushing phenomenon.
3. The liner is easy to replace
The liner is made of small wear-resistant steel plates, which are simple and convenient to replace and can be replaced in a targeted manner according to the actual wear situation.
4. Labor saving, the long service life of accessories
The disc feeder can normally work when each material enters the next process evenly, saves labor, protects the performance of the equipment, and prolongs the service life of the entire production line equipment.
5. Easy to replace
The liner is made of small wear-resistant steel plates, which are simple and convenient to replace and can be replaced in a targeted manner according to the actual wear situation.
The motor drives the disc to rotate through the reducer. When the disc rotates, the material in the bin moves with the disc, and moves to the side of the discharge port, and the material is discharged through the gate or scraper. The amount of discharge can be adjusted with a scraper device or a gate.
| Model | Disk Diameter(mm) | Rotating Speed Of Disk(r/min) | Feeding Size(mm) | Feeding Capacity (t/h) | Motor Model | Power (kw) | Weight(kg） |
| ZC300 | 300 | 9 | <20 | 0.5-1 | Y90S-6 | 0.75 | 115 |
| ZC600 | 600 | 7.5 | <25 | 1.8-3.9 | Y90S-6 | 1.1 | 410 |
| ZC800 | 800 | 7.5 | <30 | 3.5-7.6 | Y90L-6 | 1.1 | 600 |
| ZC1000 | 1000 | 7.5 | <40 | 7-16.7 | Y100L-6 | 1.5 | 800 |
| ZC1200 | 1200 | 6.5 | <50 | 7-25 | Y100L-6 | 3 | 1110 |
| ZC1500 | 1500 | 6 | <60 | 7-40 | Y132S-6 | 4 | 1980 |
| ZC1800 | 1800 | 5 | <70 | 9-60 | Y132S-6 | 5.5 | 3070 |
| ZC2000 | 2000 | 5 | <80 | 13-85 | Y132S-6 | 5.5 | 3260 |
The disc feeder is used to transport various non-viscous materials in the form of powder, material, or small pieces with a particle size not greater than 50mm. It is widely used in gold dressing plants, coal mining plants, and chemical industries.
The main reducer of the disc feeder is lubricated by its internal circulation device, and the disc feeder uses a speed-regulating motor to control the speed of the disc. The gate opening does not need to be manually adjusted frequently, and the output can be automatically adjusted.
The oil in the reducer should be replaced every six months or so.
We provide the best mine processing solution in the industry. We design our products with performance and efficiency, trusted over the years and recognized by many countries. Let’s get you started.
Copyright © 2022, JXSC All rights reserved.
Privacy Policy
Terms & Conditions
