How Does a Cone Crusher Work and What is It?

Home
Blog
Equipment Info
What is a Cone Crusher & How Does a Cone Crusher Work?

Introduction

Cone crushers are an essential part of crushing lines, known for their ability to break down rocks and ores into smaller, more manageable pieces. As heavy-duty machinery, these crushers are a common sight in mining and construction sites, where they play a pivotal role in material processing. The efficiency of cone crushers in transforming raw, bulky materials into finer materials suitable for use is unmatched. This transformation not only facilitates easier handling and transportation but also significantly enhances the operational efficiency of mining and construction projects by reducing energy consumption.

What is a Cone Crusher?

Think of a cone crusher as a powerful machine in the big league of heavy machinery. It’s mainly used for the next steps in crushing—after the big pieces have been broken down by primary crushers like jaw crushers. Its job? To take medium to hard materials, like ores and rocks, and break them down into smaller, finer bits, even down to little granules. What makes cone crushers stand out is their ability to tackle the next phases of crushing, shaving down material to the exact size and shape needed. This is super important in fields like mining and construction, where getting the material specs right is key. How do they do it? By squeezing the stuff to be crushed between a spinning cone (that’s the mantle) and a fixed bowl liner, the moving part of the cone crusher. This action is crucial for churning out aggregates and turning minerals into tiny, manageable particles.

Cone Crusher Working Principle

Starting with the motor, a well-tuned system powers the cone crusher. Through a sequence of components including the V-belt, a huge pulley, the transmission shaft, a small bevel gear, and ultimately a large bevel gear, this motor drives the eccentric sleeve. The cone crusher’s intricate transmission system makes it possible for it to perform its vital function.

The crushing cone’s axis experiences a powerful swing when the eccentric sleeve rotates. Importantly, this swinging movement causes the crushing wall’s surface to move in a way that continually approaches and recedes from the rolling mortar wall’s surface. The cone crusher operates on the basis of this dynamic action.

The actual stone crushing takes place in this ongoing operation between the mortar wall and the crushing wall. Inside the ring-shaped crushing chamber formed by the stationary cone and the moving cone, the material fed into the cone crusher undergoes an endless series of hits, squeezes, and bends.

Not only must force be applied, but it must be applied repeatedly, efficiently, and in a way that crushes the material from all sides. This is achieved by a combination of the cones’ clever placement and eccentric rotation. The material breaks down into smaller pieces until it achieves the desired size as it goes through this rigorous process of squeezing, striking, and bending. When sufficiently crushed, the material is discharged through the cone crusher’s bottom, prepared for the following stage of processing.

This methodical procedure demonstrates how the cone crusher can accurately and efficiently reduce large rocks into smaller, more manageable pieces. In order to satisfy the demands of contemporary mining, building, and aggregate usage, it functions somewhat like a combination of mechanical strength, material science, and technical acumen.

How Does a Cone Crusher Work?

Let’s walk through the entire process of how a cone crusher machinery operates, step by step:

● Feeding the Crusher: The cone crusher’s feed hopper is filled with raw materials, such as rocks, ores, or recycled concrete, to begin the process. Automated systems or manual labor can be used to accomplish this. The material is subsequently directed by the hopper into the crushing chamber, which houses all of the action.

● Crushing Chamber Dynamics: Within the concave bowl of the crushing chamber, the materials come into contact with a rotating, conical mantle. The rock material is compressed and crushed between these two elements as the mantle travels closer to and farther away from the bowl. The material is crushed from all sides thanks to this circular motion, which increases the effectiveness of the size reduction process.

● Size Reduction: How small the material gets is all down to the closed side setting (CSS)—the tightest gap between the mantle and bowl while crushing. You can adjust this setting to change the size of the final output to match what you need.

● Applying Pressure: As the mantle spins, it doesn’t just move the rocks around. It also pushes them hard against the side of the bowl, which helps to crush them. The smaller the gap, the better the crushing works.

● Discharge from the Crusher: Once the rocks are crushed to the right size, they fall out of the bottom of the crusher through the discharge opening. The CSS setting decides how big or small the crushed rocks are at this point. A bigger CSS means bigger crushed rocks, and a smaller CSS means smaller crushed rocks.

● Continuous Operation: Raw materials are fed into the top of the crusher, and crushed materials are released from the bottom, making this a continuous process. Because of the crusher’s ability to handle huge amounts of material quickly, required crushed products can be produced continuously.

● Control and Adjustment: The people running the crusher can change the size of the crushed rocks by adjusting the CSS. Many modern cone crushers have special systems that let them quickly and easily adjust the CSS, which makes the crushing process more flexible and efficient.

When we look at all these details, it’s not hard to understand how cone crushers work. They use something called compressive crushing. This means they’re really good at making rocks smaller in a way that doesn’t waste energy. They’re also great at controlling exactly how small the rocks end up. The secret is in the way the mantle moves around in a circle and how the CSS can be changed. This combination makes cone crushers super effective at crushing rocks, whether it’s the second, third, or even fourth time the rocks are being crushed.Check out Cone Crusher Diagram: A Simple Explanation for detailed diagrams and explanations.

Types of Cone Crusher

Cone crushers are pivotal in various industrial operations, from mining to aggregate production. Their designs cater to different material crushing needs, efficiency requirements, and operational constraints. Here’s a closer look at the different types of cone crushers:

Feature	Spring Cone Crushers	Symons Cone Crushers	Compound Cone Crushers	Single Cylinder Hydraulic Cone Crushers	Multi-Cylinder Hydraulic Cone Crushers
Working Principle	Mechanical spring system for overload protection.	Advanced design with hydraulic tramp release and clearing systems.	Hybrid spring and hydraulic features, allowing quick adjustments and overload protection.	Single hydraulic cylinder used for adjusting the setting and clearing the chamber.	Several hydraulic cylinders for precise adjustment and efficient clearing.
Adjustment & Safety	Manual adjustment, mechanical safety allows passage of hard materials.	Hydraulic adjustment, improved safety with hydraulic tramp release.	Hydraulic systems for adjustments, combines simplicity and safety.	Automated adjustments with a single hydraulic cylinder, enhanced safety.	Advanced automated adjustments, multiple cylinders ensure high safety levels.
Capacity	Medium to Low	Medium to High	Medium	High	Very High
Input/Output Size	Medium variability, less precise control.	Better control over output size, suitable for various stages.	Good control, suitable for a broad range of materials.	Precise control, ideal for medium to hard materials.	Precise control, excellent for producing fine sizes at high capacities.
Operational Efficiency	Lower compared to hydraulic models, due to manual adjustments.	Higher efficiency, thanks to hydraulic adjustments and better clearing.	Balanced efficiency, benefits from both hydraulic and mechanical features.	High efficiency, simplified hydraulic operations reduce downtime.	Highest efficiency, multiple cylinders provide greater crushing force and speed.
Application Suitability	Suited for medium-hard to hard materials, less automation.	Versatile, suitable for secondary, tertiary, and quaternary crushing.	Versatile, good for hard, abrasive materials.	Ideal for applications requiring medium to high productivity, with medium hardness materials.	Best for high-volume crushing of hard materials with need for precise size control.

Key Components of Cone Crushers

The cone crusher is a sophisticated piece of machinery designed for efficient crushing operations. Here’s a detailed exploration of its key components:

Top Shell & Spider Cap Assembly

This component houses the crusher’s feed. The feed is introduced through an opening at the top and might pass through a distribution plate, if present, for even distribution as it enters the crushing chamber. A spider cap, if included, encases the upper bearing of the main shaft, ensuring proper lubrication.

Main Shaft

Typically forged from high-grade steel and annealed for stress relief, the main shaft is the backbone of the cone crusher. The upper part of the shaft is supported by a self-aligning bearing in the spider cap, designed to accommodate the oscillating movement caused by the lower eccentric drive.

Step Bearing

Located at the bottom of the main shaft, the step bearing assembly supports the shaft’s weight and facilitates its oscillating movement. This three-piece arrangement is crucial for the smooth operation of the main shaft.

Mantle & Concaves

The mantle, mounted on the main shaft, oscillates to crush the material against the concave ring or bowl liner housed within the upper casing. Both the mantle and concaves are typically made from durable manganese steel alloy, forming the primary wear surfaces in the crusher.

Eccentric Drive & Bushing

The eccentric motion, essential for crushing, is achieved through a lower bushing and drive arrangement at the bottom of the main shaft. This setup, similar to gyratory crushers, allows for the adjustment of the shaft’s throw by changing the bushing size, impacting the gap and consequently the crushing action between the mantle and bowl liner.

Pinion Gear & Countershaft Assembly

This system drives the main shaft. An alloy steel pinion gear on the drive shaft, supported by bearings and powered by an external motor, engages with a crown gear to rotate the main shaft. This arrangement is pivotal for the transmission of power within the crusher.

Bottom Shell

The bottom shell, made from annealed cast steel, accommodates the drive and eccentric mechanisms. It also serves as the exit point for crushed material, underlining its importance in the crusher’s overall functionality.

Adjusting the Cone Crusher for Optimal Performance

Fine-tuning a cone crusher for optimal performance involves precise adjustments to several key parameters: the Closed Side Setting (CSS), the Open Side Setting (OSS), and the Eccentric Throw. Each of these adjustments affects the crusher’s output in terms of size, shape, and overall performance.

Closed Side Setting (CSS)

CSS adjustments can be performed in two ways: manually, through physical measurement and adjustment of the crusher’s discharge opening, or hydraulically, where hydraulic push-button controls allow for quick adjustments.

Reducing the CSS from, say, 25mm to 20mm, could refine the product size from a range of 30-40mm to 25-30mm, enhancing the product’s quality for specific applications. A smaller CSS generally results in a finer output, making it crucial for producing high-quality aggregate suited for more stringent specifications.

Open Side Setting (OSS)

The OSS is essentially the largest distance between the concave and the mantle at the point furthest from the crushing chamber. It’s adjusted by altering the vertical position of the mantle. This adjustment is less commonly modified but is crucial for determining the crusher’s maximum throughput.

Adjusting the OSS influences the crusher’s feed capacity. For instance, increasing the OSS from 50mm to 60mm might elevate the feed capacity from 200 tons per hour to 250 tons per hour, allowing the crusher to process more material within the same amount of time.

Eccentric Throw

The eccentric throw is adjusted by changing the eccentric bushing. This can involve replacing the bushing with another of a different thickness or, in some modern crushers, adjusting the throw dynamically with hydraulic or mechanical means.

Increasing the eccentric throw can enhance the crusher’s ability to crush and reduce material but might also produce a coarser product. For example, adjusting the eccentric throw from 20mm to 25mm could increase the particle size range of the product from 20-25mm to 25-30mm, impacting both the throughput and the size distribution of the product.

How to Operate Cone Crushers Professionally?

● Proper Selection: Choose the right cone crusher for the job by thinking about the type of material, size reduction ratio, and the product size you want.

● Feed Distribution: Make sure the material is spread evenly over the cone crusher’s feed plate to help the machine wear evenly and work efficiently.

● Monitor CSS Regularly: Use automatic settings if you can, or check and adjust the CSS often to keep the product size consistent and get the most material through the machine.

● Adjust Eccentric Throw According to Need: If your operation needs to change the type of material or product specs, adjust the eccentric throw to meet the new requirements.

● Maintain Regularly: Make a full maintenance schedule, checking all the important parts, like bearings, mantle, and concave, for wear and damage.

● Use Quality Wear Parts: Invest in high-quality manganese for the mantle and concave surfaces to make them last longer and reduce downtime.

● Avoid Non-Crushable Material: Use metal detectors or magnetic separators to stop tramp metal from getting into the crusher, as this can cause a lot of damage.

Common Industries and Applications of Cone Crushers

Industies

● Mining Industry

● Construction Industry

● Cement Industry

● Asphalt and Concrete Production

● Quarrying

● Recycling Industry

Applications

● Mining operations for ore reduction

● Aggregate production for construction

● Concrete and asphalt aggregate production

● Secondary or tertiary crushing applications

● Quarrying for hard rock extraction

● Cement production

Advantages of Cone Crushers in Material Processing

Cone crushers have several benefits when it comes to processing materials:

● Versatility in Material Hardness: Cone crushers can easily crush materials with different levels of hardness, from soft limestone to very hard granite. For example, when processing limestone, a cone crusher can turn limestone with a Mohs hardness of about 3 into gravel sizes. For harder basalt, with a Mohs hardness of around 5-6, it can make the pieces even smaller. This versatility means cone crushers can be used in different stages of the crushing process.

● Energy Efficiency: Compared to other ways of crushing large stone, cone crushers are designed to be energy-efficient, crushing more with less energy.

● Uniform and High-Quality Aggregate: The controlled crushing action of a cone crusher makes consistent, uniform aggregate, which is essential for making concrete and asphalt. A cone crusher might produce aggregates with a flakiness index of less than 10%, meaning over 90% of the output material has a cubical shape, which is desirable in construction materials.

● High Reduction Ratio: Cone crushers can achieve a higher reduction ratio than many other types of crushers, often between 6:1 and 8:1, and sometimes up to 10:1. For instance, if you feed material that’s 300mm in size into a cone crusher, you could get an output of 30mm or less, depending on the CSS setting, making it very effective for reducing size.

● Ideal for Secondary and Tertiary Crushing Stages: Because of their high reduction ratio and precise control over the product size, cone crushers work particularly well in the secondary and tertiary stages of crushing. For example, in a multi-stage crushing operation, a primary jaw crusher might reduce ore from a 1-meter size to 100mm, and then the cone crusher could reduce it further to about 10-20mm, ready for milling.

● Capacity to Handle Large Feed Sizes: Cone crushers can handle feed material sizes up to 300mm, providing an easy way to reduce large rocks directly from quarries into smaller material sizes suitable for transport and further processing.

Challenges and Limitations of Cone Crushers

While cone crushers work great in many different uses, they do face some specific challenges and limitations that can impact how efficient and productive they are overall.

● Material Compatibility: Cone crushers work incredibly well with ores, granite, and basalt. When things are going well, they break them down very nicely and don’t wear out too much. However, they have trouble handling goopy, squishy, or sticky materials like clay. These have the potential to clog the equipment and render it unusable.

● Product Uniformity: Cone crushers are quite versatile and can break down a wide range of materials, however achieving uniformly sized particles can be difficult. This is particularly valid for non-equally breaking materials. For other applications, such as the production of concrete or asphalt, where uniform particle size and shape are crucial, this restriction might not be the best option.

● Size Limitations: A cone crusher’s design places a limit on the largest raw material sizes that it can process. Overly large materials can clog pipes or necessitate multiple crushing steps in advance. This increases the cost and processing time overall.

● Operational Difficulties: Cone crushers are subject to high wear and tear, especially when processing coarse materials. This wear might result in downtime, which lowers overall production, in addition to raising maintenance expenses.

FAQs

How does a cone crusher differ from other types of crushers?

Cone crushers crush via rotational movement and pressure, creating cubical products, unlike jaw crushers which use compression between plates. For detailed crusher comparisons, visit Types of Crushers 101 Guide: What You Should Know.

What materials can be processed with a cone crusher?

They handle a variety of soft to hard rocks like limestone, granite, basalt, and quartz, tailored by crusher type and settings.

What is the typical capacity range of cone crushers?

Capacities vary from 35 to over 1000 tons per hour, adaptable to small or large operations.

What are the key maintenance tips for a cone crusher?

Regular inspections, proper lubrication, timely replacement of wear parts, and CSS adjustments are crucial.

Choosing the Right Cone Crushers for Your Mine Operations

Picking the best cone crusher means thinking about what the material is like, what you want to get out of it, and what your mine needs to work well. Things like how hard the material is, the size of the feed, and how much you need to reduce the size should all help you decide which one to get. Talking to the manufacturer and looking at how much it’ll cost to run over time are also really important steps.

JXSC Mineral Processing Equipments Bring You Convenience

JXSC, started in 1985, offers a wide range of cone crushers made for the tough needs of the mining and construction industries. Known for their big crushing ratio, high production efficiency, and advanced automation, JXSC cone crushers make sure to produce finely shaped aggregates. They have a lot of different crushing cavities, materials that are very resistant to wear for a long life, and clever designs like the spring-type overload protection and hydraulic cavity cleaning system to make them easy to use. With two factories covering 30,000 sq. m, using advanced manufacturing and 3D design technologies, JXSC is dedicated to fast, high-quality production, making your work process as efficient and long-lasting as possible.

Conclusion

Cone crushers are really important in processing materials across different industries. Knowing how a cone crusher functions, what parts it has, and how to use it well can make a big difference in how efficient your operations are. As technology and design keep getting better, modern cone crushers are more efficient, safer, and simpler to take care of, providing a dependable answer for material processing needs.

Company

Introduction

What is a Cone Crusher?

Cone Crusher Working Principle

How Does a Cone Crusher Work?

Types of Cone Crusher

Key Components of Cone Crushers

Top Shell & Spider Cap Assembly

Main Shaft

Step Bearing

Mantle & Concaves

Eccentric Drive & Bushing

Pinion Gear & Countershaft Assembly

Bottom Shell

Adjusting the Cone Crusher for Optimal Performance

Closed Side Setting (CSS)

Open Side Setting (OSS)

Eccentric Throw

How to Operate Cone Crushers Professionally?

Common Industries and Applications of Cone Crushers

Advantages of Cone Crushers in Material Processing

Challenges and Limitations of Cone Crushers

FAQs

Choosing the Right Cone Crushers for Your Mine Operations

JXSC Mineral Processing Equipments Bring You Convenience

Conclusion

Share:

Related Posts

Contact Your Personal Mineral Experts

37+

Years of Experience

500+

Satisfied Clients

1,000+

Successful Plant Projects

40+

Mineral Solutions

40+

Serving Countries & Regions

Get In Touch with us

Equipment

Expertise

About

Media

Speak to Our Experts Today

Contact Us

search Products